Utility/Box Cutter Challenge
October 03, 2019 01:20PM
Am am going to try and use only my Olfa utility knife for my EDC use for one week. Most of what I cut only needs shallow push cutting, so it should not be a problem.

------------------------------------------------------------------------------------------------------------------------------------------------------
"Gotta love living in 2019 baby, (63rc too soft on a production knife)"
--Shawn Houston
__
"I am still discussing issues of steels and performance at this stage."
--Cliff Stamp
__
"Cause geometry cuts, .....steel determines the level and the duration"
--Roman Landes
__
"But in general, I'm all about high performance, Ergos, safety. That's why I've been accused of 'designing in the dark' "
--Sal Glesser
------------------------------------------------------------------------------------------------------------------------------------------------------
StoneSharpEdges

Jason D. Stone on YouTube



Edited 1 time(s). Last edit at 10/03/2019 05:24PM by jasonstone20.
Re: Utility/Box Cutter Challenge
October 03, 2019 03:32PM
Just curious Jason, of the various razor holding tools out there, which one is your favourite? I mean stuff like the Rexford R.U.K. and stuff of the sort.
Re: Utility/Box Cutter Challenge
October 03, 2019 05:26PM
Luisknivacc,
I like the Piranta Tracer 22 and the Gerber EAB.

------------------------------------------------------------------------------------------------------------------------------------------------------
"Gotta love living in 2019 baby, (63rc too soft on a production knife)"
--Shawn Houston
__
"I am still discussing issues of steels and performance at this stage."
--Cliff Stamp
__
"Cause geometry cuts, .....steel determines the level and the duration"
--Roman Landes
__
"But in general, I'm all about high performance, Ergos, safety. That's why I've been accused of 'designing in the dark' "
--Sal Glesser
------------------------------------------------------------------------------------------------------------------------------------------------------
StoneSharpEdges

Jason D. Stone on YouTube
Re: Utility/Box Cutter Challenge
October 13, 2019 08:11PM
Ok, I did a week with just using the OLFA knife for EDC and I didn't find that I needed another knife at all.

------------------------------------------------------------------------------------------------------------------------------------------------------
"Gotta love living in 2019 baby, (63rc too soft on a production knife)"
--Shawn Houston
__
"I am still discussing issues of steels and performance at this stage."
--Cliff Stamp
__
"Cause geometry cuts, .....steel determines the level and the duration"
--Roman Landes
__
"But in general, I'm all about high performance, Ergos, safety. That's why I've been accused of 'designing in the dark' "
--Sal Glesser
------------------------------------------------------------------------------------------------------------------------------------------------------
StoneSharpEdges

Jason D. Stone on YouTube
Re: Utility/Box Cutter Challenge
June 12, 2020 10:37PM
To be honest, all of my EDC cutting can be done with a Havalon Piranta, with the 60A (thicker) blade.

------------------------------------------------------------------------------------------------------------------------------------------------------
"Gotta love living in 2019 baby, (63rc too soft on a production knife)"
--Shawn Houston
__
"I am still discussing issues of steels and performance at this stage."
--Cliff Stamp
__
"Cause geometry cuts, .....steel determines the level and the duration"
--Roman Landes
__
"But in general, I'm all about high performance, Ergos, safety. That's why I've been accused of 'designing in the dark' "
--Sal Glesser
------------------------------------------------------------------------------------------------------------------------------------------------------
StoneSharpEdges

Jason D. Stone on YouTube
cKc
Re: Utility/Box Cutter Challenge
June 12, 2020 10:41PM
swiss army is my goto if im just taking 1edc

----------------------------------------------------------------------
It's not Cliff, its Dr Stamp
#kebabstickcut, it's a thing - make it happen
Re: Utility/Box Cutter Challenge
June 13, 2020 08:30AM
cKc,
It is just that my EDC cutting chores are such light work, I really don't need anything more substantial.

------------------------------------------------------------------------------------------------------------------------------------------------------
"Gotta love living in 2019 baby, (63rc too soft on a production knife)"
--Shawn Houston
__
"I am still discussing issues of steels and performance at this stage."
--Cliff Stamp
__
"Cause geometry cuts, .....steel determines the level and the duration"
--Roman Landes
__
"But in general, I'm all about high performance, Ergos, safety. That's why I've been accused of 'designing in the dark' "
--Sal Glesser
------------------------------------------------------------------------------------------------------------------------------------------------------
StoneSharpEdges

Jason D. Stone on YouTube
Sorry, only registered users may post in this forum.

Click here to login